久久久久成人精品国产亚洲综合无码av|九九国产精品视频久久|国产精品亚洲二区无码|亚洲va中文字幕无码不卡一区

Welded high-pressure flat gate valve

Products > Oil field valve > Welded high-pressure flat gate valve

Welded high-pressure flat gate valve

Model: ZF63Y
Nominal diameter: DN40-200mm
Nominal pressure: 16-35MPa
Connection: Welding
Main material: WCB, LCB, A105, CF8 , CF3, CF8M, CF3M, C5, WC6
Transmission: manual, worm gear, electric , pneumatic, hydraulic, electro-hydraulic, etc.
Use of media: water, oil, natural gas, etc.
Contact purchase
shared:

Z63Y-160, ZF63Y high-pressure welded flat gate valve Product Description

This series of products adopt the new balanced floating seal structure, which is suitable for the opening, closing and adjusting devices of control media such as oil and natural gas with the pressure less than 40MPa and the temperature not higher than 120 ℃. The product is of novel design and proper material selection , Strict testing, light operation, with strong anti-corrosion, wear resistance, erosion resistance, the oil and gas industry is an ideal new equipment.

Structural characteristics and working principle

1, the use of floating seat, two-way opening and closing, reliable sealing, opening and closing flexible.

2, the lower part of the gate open diversion hole, and to give precise guidance, while the seal are sprayed  Carbide welding, erosion-resistant. High-pressure hard-sealed welding flat gate valve

3, the body carrying capacity is high, the channel is straight-through, fully open, and the gate diversion hole  Similar phase-through and straight pipe, flow resistance is small. Stem at the composite filler, multiple seals, making the seal reliable, small friction. Futai Oilfield valve experts

4, closing the valve, turn the hand wheel clockwise, the gate moved to the bottom, due to referral  The role of quality pressure, the inlet seal seat to the gate direction. A larger seal than the pressure, thus forming the first seal. At the same time, the gate pressure to the outlet seal seat, a double seal.

5, due to the double seal, it can be in the pipeline does not affect the work even more  For wearing parts. This is our factory product priority over similar products at home and abroad an important feature.

6, open the gate, turn the hand wheel counterclockwise, the gate up, diversion holes and channels  Hole through. With the rise of the gate, the through hole gradually increases to the limit position, the guide hole coincides with the passage hole, then fully open. Oilfield pipeline flat gate valve

 Z63Y-160, ZF63Y high-pressure welded flat gate valve performance specifications

Pressure Level16.020.025.032.035.040.0
Working pressure (MPa)≤16≤20≤25≤32≤35≤40
Strength test (MPa)twenty four3037.54852.560
Seal test (MPa)17.6twenty two27.535.238.544
mediumWater, oil, natural gas and so on
temperature-19 to 120 ° C

 

Z63Y-160, ZF63Y high-pressure welded flat gate valve shape and connection dimensions
PN (MPa)DN (mm)Size (mm)
DGCLEHW
16
20
4036436421082356240
50465270242100379260
65586389260125402280
807278108310157475320
1009095130450183548350
150135150195550262660450
200179195235700340793550
254036436421082356240
50465676310120379260
65536789340132402280
806586114380157475320
10080101133450183548350
150130167219620272793450
200179195235700340793550
354036436421082356240
50465676300123379260
65536789340136402280
806586114380162475320
10080101133450188548350
150130167219620278793450
200179195235700340793550

 

Z63Y-160, ZF63Y high pressure welded flat gate valve use, maintenance, care and precautions

1, the valve has been made before the factory strength and seal test, all connections should be used to maintain the initial state.

2, this series of valve operation handwheel marked with the opening and closing rotation signs, the upper rod with open and close the height of the rod, for the regulation instructions.

3, the valve and pipeline welding, the valve should be opened, the proper use of wet material to protect the neck, minimize heat conduction, to prevent damage to the seal pieces. Forté high-pressure flat gate valve

4, closed the valve is forbidden to use the force lever, the gate closed to the top of the hand wheel should be rotated ? turn so that the gate in a floating state.

5, the valve in use, as a result of wearing parts and leakage, should be promptly replaced. 0577-67354191

6, the valve in the overhaul process, the cavity should be cleaned, the assembly should be the transmission parts plus grease.

7, valve storage is disabled, the gate should be in the closed position, long-term deposit